2008 (08) LINCOLN MARK LT Radio / Stereo Installation Kit - Do your next car radio / stereo install yourself - Installing a new radio / stereo is a snap!!
2008 (08) LINCOLN MARK LT Radio / Stereo Installation Kit
This radio / stereo install kit will come with all the parts needed for radio / stereo installation of most all replacement radios in a 2008 (08) LINCOLN MARK LT This radio / stereo install kit includes
Radio / Stereo Mounting Kit
Wire Harness
Price:
Which radio / stereo install kit do you want? The differences between the radio / stereo install kits is the Radio / Stereo mounting kit. The different Radio / Stereo mounting kits can be viewed below
Below are the individual pieces that come in the radio / stereo install kit
Radio / Stereo Mounting Kit
Radio / Stereo Mounting Kit
Wire Harness
Antenna Adapter
This is 'kit1' in the radio / stereo install kit dropdown box above $15.00
This is 'kit2' in the radio / stereo install kit dropdown box above $15.00
This Wire Harness will greatly simplify any radio / stereo installation. It will match up color for color to the wire harness of your aftermarket radio / stereo $22.50
Not Available Radio / Stereo install antenna adapter not available.
ALPINE - JVC - PIONEER - CLARION - PANASONIC - SONY REPLACEMENT HARNESSES AVAILABLE
Factory Radio Removal Tool
Ford, Mazda & Blaupunkt Radio Removal Tool If your factory radio has four small holes, 2 on each side, this tool will be needed to properly remove the radio.
$11.00
Ford / Lincoln / Mercury Factory Amplifier Integration Harness
Factory Amplifier Integration Harness This harness will allow you to integrate the factory amplifier into an aftermarket radio / stereo installation.
$22.50
Universal Dash Removal Tools
Dash Removal Tools Some radio / stereo installations may require that parts of the dash be removed. Tools come in 3 different wedge shapes.
$28.99
Premium Factory Sound Systems - OEM-2 Premium Factory Sound System Interface
This will be required for the installation of aftermarket radio / stereo in a vehicle with a premium sound system
The OEM-2 is the one-piece solution for replacing the radio or adding an amplifier to any factory system. This system is a 4 channel signal level converter with an internal remote trigger and a common ground speaker conversion circuitry, the OEM-2 is truly a multi-problem solution.
Adjusts up to 4 channels of signal input from 2 to 60 watts.
The OEM-2 transformer isolates the input and output circuits, blocking DC noise and preventing snap, crackles and pops typical in other products.
Sealed potentiometers prevent circuit-induced distortion and signal drift.
Allows for conversion of floating ground head units to match common ground speakers systems.
Provides an internal trigger to turn on a 2 amp/12 volt power line with a 1 second delay for an amplifier or power antenna.
Deliver linear frequency response /-0.5 dB from 20 to 20,000 Hz, for unparalleled sound quality.
A. Top Dash C. Kick Panel E. Lower door G. Lower rear I. Rear side panel K. Rear sides M. Rear Door (Wagons, Vans) O. Rear Posts (Trucks)B. Front Dash D. Upper Door F. Behind Seat (Trucks) H. Upper Rear J. Rear deck L. Tall sides N. Rear Top (Wagons, Vans) P. Rear Corner (Trucks)
Car Audio Aftermarket Radio / Stereo Installation Kits - Faceplates, Wire Harnesses, Antenna Adapters & PAC aftermarket car audio
installation accessories! Car Audio Aftermarket Radio / Stereo Installation Kits for most vehicles Don't worry about wiring up that new radio / stereo, with a radio / stereo install kit everything is a snap!
