|
2001 (01) FORD Ranger Car Radio / Stereo Installation Kit
|
A SPECIALITY HARNESS WILL BE REQUIRED FOR AN AFTERMARKET RADIO/STEREO INSTALL IN THIS VEHICLE
SCROLL DOWN TO VIEW THE AVAILABLE HARNESSES
|
|
| Below are the individual pieces that come in the car radio / stereo installation kit(s) |
| Car Radio / Stereo Mounting Kit |
Car Radio / Stereo Mounting Kit |
Wire Harness |
Antenna Adapter |
 |
|
 |
|
Not Available
Car Radio / Stereo install faceplate / mounting bracket not available. |
Not Available
Car Radio / Stereo install faceplate / mounting bracket not available. |
This Wire Harness will greatly simplify any car radio / stereo installation. It will match up color for color to the wire harness of your aftermarket radio / stereo
THIS HARNESS WORKS ON STANDARD WIRING ONLY. FOR AMPLIFIED, JBL, BOSE OR PREMIUM SOUND SYSTEMS. A SPECIALITY HARNESS WILL BE REQUIRED.
$12.40 |
Not Available
Car Radio / Stereo install antenna adapter not available. |
| |
|
|
|
| Radio Replacement Interface for Select Ford Vehicles Featuring Premium Sound Systems |
 |
|
Facilitates the replacement of factory-installed premium sound systems in select Ford vehicles while retaining the function of the factory amplified audio system.
|
- Plug-and-play installation retains factory wiring integrity
- Transformer isolated for optimal sound and performance
- Maintains correct phasing
- Retains the function of the factory-installed amplified sound system
|
|
|
|
|
|
| Need a replacement harnesses for your aftermarket radio / stereo? Click Here |
ALPINE - JVC - PIONEER - CLARION - PANASONIC - SONY
REPLACEMENT STEREO HARNESSES AVAILABLE
|
|
| Factory Radio/Stereo Removal Tool |
 |
Ford, Mazda & Blaupunkt Radio Removal Tool
If your factory radio / stereo has four small holes, 2 on each side, this tool will be needed to properly remove the radio/stereo.
|
|
| $11.00 |
|
|
| 9-PC Soft Silicone Dash Removal Tools Set |
 |
Dash Removal Tools
Some radio / stereo installations may require that parts of the dash be removed. These clear soft silicone tools are made specifically for high end installations.
Helps elimiate scratches and chips!
NO USING A SCREWDRIVER!
|
|
| $24.99 |
|
|
| Factory System Integration - Add an Amp or Aftermarket Stereo / Radio |
 |
| For the installation of aftermarket radio / stereo, or amplifier integration into a vehicles pre-existing factory system. |
The #5065 is a one-device solution for today's vehicle sound systems. It features programmable input and output circuitry with slide switches, which allows connection of RCA level or speaker level input and output. DC coupling circuit ensures noise free integration and no load induced on the factory system. This is in contrast to a normal LOC which uses resistors and can stress a factory radio's circuitry.
The #5065 utilizes signal sense to detect when audio is present in the device, and creates a 12V output usable for triggering an external amplifier.
|
- Designed to be connected in the rear of the vehicle for quick installation
- Provides 12v amplifier turn-on trigger wire
- Linear 20 to 20,000Hz output based on input signal
- Transformer isolated for optimal sound and performance
- Maintains correct phasing
- 60 watts maximum input per channel
|
|
|
|
|
| Factory Speaker Information - Size & Location |
| | Front Speaker Size & Location: 6x8E |
| | Rear Speaker Size & Location: 6x8K |
| | A. Top Dash C. Kick Panel E. Lower door G. Lower rear I. Rear side panel K. Rear sides M. Rear Door (Wagons, Vans) O. Rear Posts (Trucks)B. Front Dash D. Upper Door F. Behind Seat (Trucks) H. Upper Rear J. Rear deck L. Tall sides N. Rear Top (Wagons, Vans) P. Rear Corner (Trucks) |
|
|
