|
2001 (01) CHEVROLET (CHEVY) Malibu Car Radio / Stereo Installation Kit
|
A SPECIALITY HARNESS WILL BE REQUIRED FOR AN AFTERMARKET RADIO/STEREO INSTALL IN THIS VEHICLE
SCROLL DOWN TO VIEW THE AVAILABLE HARNESSES
|
|
| Below are the individual pieces that come in the car radio / stereo installation kit(s) |
| Car Radio / Stereo Mounting Kit |
Car Radio / Stereo Mounting Kit |
Wire Harness |
Antenna Adapter |
 |
 |
 |
 |
This is 'kit1' in the car radio / stereo installation kit dropdown box above
$18.00 |
This is 'kit2' in the car radio / stereo installation kit dropdown box above
FITS DOUBLE DIN OR 2 ISO CHASSIS RADIOS
$18.00 |
Not Available
Car Radio / Stereo install wire harness not available. |
An antenna adapter is required when installing any car radio / stereo other than the factory model
$12.40 |
| |
|
| OnStar Radio Replacement Interface for Select GM Vehicles without Bose Sound System |
 |
| This will be required for retaining OnStar functionality in NON Bose Audio Systems |
|
Retains the function of OnStar when the factory radio is replaced. Generates all safety warning chimes. Compatible with non Bose audio systems.
|
- Not compatible with 2009 vehicles that are equipped with O.E.M. Bluetooth
- Retains OnStar when the factory radio is replaced
- Maintains a 'healthy' status on the Class II databus
- Plug-in installation for vehicles with 24-pin harness
|
|
|
|
|
| OnStar Radio Replacement Interface for Select GM Vehicles with Bose Sound System |
 |
| This will be required for retaining OnStar functionality in Bose Audio Systems |
|
Retains the function of OnStar and Bose amplified audio system when the factory radio is replaced. Generates all safety warning chimes. CHIME MODULE INCLUDED.
|
- Retains Bose amplified audio system
- Retains OnStar when the factory radio is replaced
- Retains all safety warning chimes
- Maintains a 'healthy' status on the Class II databus
- Plug-in installation for vehicles with 24-pin harness
|
|
|
|
|
|
| Need a replacement harnesses for your aftermarket radio / stereo? Click Here |
ALPINE - JVC - PIONEER - CLARION - PANASONIC - SONY
REPLACEMENT STEREO HARNESSES AVAILABLE
|
|
| 9-PC Soft Silicone Dash Removal Tools Set |
 |
Dash Removal Tools
Some radio / stereo installations may require that parts of the dash be removed. These clear soft silicone tools are made specifically for high end installations.
Helps elimiate scratches and chips!
NO USING A SCREWDRIVER!
|
|
| $24.99 |
|
|
| Factory System Integration - Add an Amp or Aftermarket Stereo / Radio |
 |
| For the installation of aftermarket radio / stereo, or amplifier integration into a vehicles pre-existing factory system. |
The #5065 is a one-device solution for today's vehicle sound systems. It features programmable input and output circuitry with slide switches, which allows connection of RCA level or speaker level input and output. DC coupling circuit ensures noise free integration and no load induced on the factory system. This is in contrast to a normal LOC which uses resistors and can stress a factory radio's circuitry.
The #5065 utilizes signal sense to detect when audio is present in the device, and creates a 12V output usable for triggering an external amplifier.
|
- Designed to be connected in the rear of the vehicle for quick installation
- Provides 12v amplifier turn-on trigger wire
- Linear 20 to 20,000Hz output based on input signal
- Transformer isolated for optimal sound and performance
- Maintains correct phasing
- 60 watts maximum input per channel
|
|
|
|
|
| Factory Speaker Information - Size & Location |
| | Front Speaker Size & Location: 4x6A |
| | Rear Speaker Size & Location: 6x9J |
| | A. Top Dash C. Kick Panel E. Lower door G. Lower rear I. Rear side panel K. Rear sides M. Rear Door (Wagons, Vans) O. Rear Posts (Trucks)B. Front Dash D. Upper Door F. Behind Seat (Trucks) H. Upper Rear J. Rear deck L. Tall sides N. Rear Top (Wagons, Vans) P. Rear Corner (Trucks) |
|
|
