1989 (89) CHEVROLET (CHEVY) Suburban Car Stereo Installation Kit ALL stereo installation products on this site are manufactured in the USA. All shipping FREE

 1989 (89) CHEVROLET (CHEVY) Suburban

View Mobile Version of this page Back HomeView CartContact Us  
 1989 (89) CHEVROLET (CHEVY) Suburban Car Stereo Installation Kit
View 3164
View Larger Image
This car radio / stereo install kit will come with all the parts needed for stereo installation of most all replacement stereos in a 1989 (89) CHEVROLET (CHEVY) Suburban
This car stereo installation kit includes
  • Car Stereo Mounting Kit
    REQUIRES THE FACTORY MOUNTING BRACKET
  • Wire Harness
  • Antenna Adapter
Price:
$
 Below are the individual pieces that come in the car stereo installation kit(s)
 Car Stereo Mounting Kit  Car Stereo Mounting Kit  Wire Harness  Antenna Adapter
View Stereo Mounting Kit Not Available View Wire Harness View Antenna Adapter
This is 'kit1' in the car stereo installation kit dropdown box above
$18.00
Not Available
Car Stereo install faceplate / mounting bracket not available.
This Wire Harness will greatly simplify any car stereo installation. It will match up color for color to the wire harness of your aftermarket stereo
$12.40
An antenna adapter is required when installing any car stereo other than the factory model
$12.40
 
 Need a replacement harnesses for your aftermarket stereo? Click Here
ALPINE - JVC - PIONEER - CLARION - PANASONIC - SONY
REPLACEMENT STEREO HARNESSES AVAILABLE
 9-PC Soft Silicone Dash Removal Tools Set
Soft Silicone Dash Removal Tools
Dash Removal Tools
Some stereo installations may require that parts of the dash be removed. These clear soft silicone tools are made specifically for high end installations.
Helps elimiate scratches and chips!
NO USING A SCREWDRIVER!
$24.99
 Factory System Integration - Add an Amp or Aftermarket Stereo
Premium Factory Sound Systems Integration
For the installation of aftermarket stereo, or amplifier integration into a vehicles pre-existing factory system.
The #5065 is a one-device solution for today's vehicle sound systems. It features programmable input and output circuitry with slide switches, which allows connection of RCA level or speaker level input and output. DC coupling circuit ensures noise free integration and no load induced on the factory system. This is in contrast to a normal LOC which uses resistors and can stress a factory radio's circuitry.
The #5065 utilizes signal sense to detect when audio is present in the device, and creates a 12V output usable for triggering an external amplifier.
  • Designed to be connected in the rear of the vehicle for quick installation
  • Provides 12v amplifier turn-on trigger wire
  • Linear 20 to 20,000Hz output based on input signal
  • Transformer isolated for optimal sound and performance
  • Maintains correct phasing
  • 60 watts maximum input per channel
$44.95
Instructions: Pdf Instruction Manual
 Factory Speaker Information - Size & Location
 Front Speaker Size & Location:  3.5A, 5.25, 6E
 Rear Speaker Size & Location:  4x10L
 A. Top Dash C. Kick Panel E. Lower door G. Lower rear I. Rear side panel K. Rear sides M. Rear Door (Wagons, Vans) O. Rear Posts (Trucks)B. Front Dash D. Upper Door F. Behind Seat (Trucks) H. Upper Rear J. Rear deck L. Tall sides N. Rear Top (Wagons, Vans) P. Rear Corner (Trucks)
My Install Kit is a registered Trademark All Rights Reserved. My Install Kit cannot be responsible for errors published online. Some information published has been provided by manufacturer's and or corporations. My Install Kit tries to maintain accuracy. My Install Kit recognizes all manufacturer's trademarks and or trade names herein and disclaims any proprietary interest in their use. Copyright My Install Kit © 2014

Car Audio Aftermarket Stereo Installation Kits - Faceplates, Wire Harnesses, Antenna Adapters & PAC aftermarket car audio installation accessories! Car Audio Aftermarket Stereo Installation Kits for most vehicles Don't worry about wiring up that new stereo, with a car stereo installation kit everything is a snap!